Items that the customer will need to supply: 10 hp motor should be rated at 230volt or 230/460volt and a rpm of 17XX or 34XX. Resistor to discharge the capacitors when the system is turned off Extra large terminal block to connect to your idler motor and three phase equipment. The AD10 is the perfect solution for voltage-sensitive equipment such. An example of these loads would be a table saw or drill press. It was designed and is best suited for general or light duty loads up to 5 hp. The AR10 is a great solution due to its reliability and affordable price tag. Heavy duty contact voltage sensing relay that controls the starting circuit of the phase converter ( this design is used by many of the top converter manufactures) Single Phase to 3 Phase Converter, MY-PS-15 Model, Suitable for 10HP(7.5kW) 30 Amp 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input/Output. The 10 hp/10 kVA phase converter from American Rotary is designed to power most loads up to 5hp or 14amps. Heavy duty start capacitor rated at 250vac Heavy duty run capacitors rated at 370vac to balance the generated leg from L1 and L2 Starter contactor for L1 and L2 input power Pre-cut wire with terminated ends to connect all of the components Mounting hardware to mount the components within the enclosure Pre-Drilled Electrical enclosure to house the components With this setup you will have a 10 hp rotary phase converter, your 10 hp motor should be rated at 230volt or 230/460volt and a rpm of 17XX or 34XX. Enter horsepower, volts, and motor efficiency below to convert to amps. Brand new phase converter kit, to be used in conjunction with a 10 hp three phase motor.

10 hp 3 phase converter